Inline Hydraulic Oil Filter Return Line 10 Micron 165L 12 Bar 1 ¼ BSP Spin On

Description

Inline Hydraulic Oil Filter Return Suction Line 10 Micron 165L 12 Bar Spin On Canister

THE IMPORTANCE OF AN EFFICIENT FILTRATION

The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid. The nature of the contaminant may be: gaseous, namely
air mixed with the fluid; fluid, it depends on water penetrating the fluid; solid, therefore particles of various origins and dimensions. Customers who operate equipment are always focused
on obtaining the best possible performance, lower energy consumptions and greater respect for the environment. These characteristics can be attained by using top
quality components in the hydraulic system, which are more sensitive to the presence of contaminants in the fluid.
Starting from these requirements, we understand how important and fundamental it is to prevent the presence of air and water from mixing in the fluid tank by using dedicated solutions.
It is also crucial to limit the presence of solid particles in the hydraulic circuit through a suitable filtering system, which is indispensable to maintain the project requirements of the system over time and to keep running costs low. The correct choice of a filter and its optimum position in the hydraulic system requires the same care and experience needed to choose all the other components. The use of filters with larger filtering surfaces reduces, at equal flow rates, the superficial contaminant load and therefore the filter’s life is extended proportionally.
To maintain the maximum efficiency of the system, the filters must have a clogging indicator showing the differential pressure on the filtering cartridge and to immediately point out when the cartridge needs replacing in order to prevent the by-pass valve from opening.

• HF 620 filter series are directly connected to the return line of hydraulic circuit.
• In filters of HF 620 series in normal working conditions, the total pressure must not be more than 1.4 psi (0,1 bar) on suction line and 5.8 (0,4 bar) on return line.
• 1 1/4″ BSP Connection
• Up to 165 l/min
• Return Line max flow 165l/min
• Spin on Canister